Turner Performance Products Oversized Bar Mounts With Pro Taper Contour Handlebar Combo

Turner Performance Products Oversized Bar Mounts With Pro Taper Contour Handlebar Combo
$117.98

Shop Now

Turner Performance Products Oversized Bar Mounts With Pro Taper Contour Handlebar Combo
Made with Aerospace 2050 aluminum.New chemically applied ""un-sticker graphics.""Knurled clutch side for secure grip hold.1/4"" cut guides for precise modification.""Solid Mounts"" bolt on top of stock 7/8"" bar mounts, and adds 1/4"" rise.""Rubber Mounts"" replace the stock bar mounts on CR/CRF, KX/KXF and RMZ models.
Category: automotive > motorcycle & powersports > parts > controls > handlebars Brand: Turner Performance Products
MotoSport
$117.98
Shop Now


Similar Products:

Turner Performance Products Oversized Bar Mounts With Turner Oversized Handlebar Combo

Turner Performance Products Oversized Bar Mounts With Turner Oversized Handlebar Combo

$102.98
View Product


Made of 6061 T-6 anodized aluminum.Shot-peen for added strength. Requires specific mounts to accommodate oversized (1-1/8"") bars.Laser etched markings for precision fit.Pad included.""Solid Mounts"" bolt on top of stock 7/8"" bar mounts, and adds 1/4"" rise.""Rubber Mounts"" replace the stock bar mounts on CR/CRF, KX/KXF and RMZ models.
Category: automotive > replacement parts > fuel system > fuel pumps & accessories | Brand: Turner Performance Products | Merchant: MotoSport

Turner Performance Products Oversized Bar Mounts With Renthal Fat Bar Combo

Turner Performance Products Oversized Bar Mounts With Renthal Fat Bar Combo

$152.97
View Product


1-1/8"" (28.6mm) diameter, aluminum alloy, taper-wall, braceless handlebar.Combines excellent strength with good resilience.This bar is particularly applicable where the lack of a crossbrace is of special importance.""Solid Mounts"" bolt on top of stock 7/8"" bar mounts, and adds 1/4"" rise.""Rubber Mounts"" replace the stock bar mounts on CR/CRF, KX/KXF and RMZ models.
Category: automotive > motorcycle & powersports > parts > controls > handlebars | Brand: Turner Performance Products | Merchant: MotoSport

Ergotron 45-266-026 StyleView Sit-Stand Combo Arm - Mounting kit (articulating arm wall track mount) for LCD display / keyboard / mouse / bar code scanner (Lif

Ergotron 45-266-026 StyleView Sit-Stand Combo Arm - Mounting kit (articulating arm wall track mount) for LCD display / keyboard / mouse / bar code scanner (Lif

$475.00
View Product


Ergotron StyleView Sit-Stand Combo Arm - Mounting kit (articulating arm wall track mount) for LCD display / keyboard / mouse / bar code scanner (Lift and Pivot) - plastic al
Category: office products > desk accessories & workspace organizers > platforms stands & shelves > monitor arms & stands | Brand: Ergotron | Merchant: MacMall UPC: 698833016369

Turner Performance Products Universal Bar Mounts - Oversized 1-1/8 Bars

Turner Performance Products Universal Bar Mounts - Oversized 1-1/8 Bars

$42.99
View Product


The Turner Universal Bar Mounts are an easy and affordable way to upgrade your O.E.M. handlebar mounts to accept oversized 1-1/8"" handlebars.Fits existing handlebar clamps and allows for use of 1-1/8"" big bars.""Solid Mounts"" bolt on top of stock 7/8"" bar mounts and adds 1/4"" rise.""Rubber Mounts"" replace the stock bar mounts on CR/CRF, KX/KXF and RMZ models.
Category: automotive > exterior accessories > cargo management | Brand: Turner Performance Products | Merchant: MotoSport

Turner Performance Products ST Bars

Turner Performance Products ST Bars

$44.99
View Product


The Turner ST Bars are an easy and affordable way to upgrade your ride with new and better or to replace your thrashed handlebars.Made of 6061 T-6 heat treated aluminum.Shot-peened finish for added durability.Laser-etched markings for precision fit.Includes cross bar pad.
Category: automotive > motorcycle & powersports > parts > controls > handlebars | Brand: Turner Performance Products | Merchant: MotoSport

Cycra U-Clamp Handlebar Mount System (Type: KTM 03-08 / Renthal Fat Bar / Neken / 08+ Pro Taper Evo / Contour)

Cycra U-Clamp Handlebar Mount System (Type: KTM 03-08 / Renthal Fat Bar / Neken / 08+ Pro Taper Evo / Contour)

$40.46
View Product


Cycra U-Clamp Handlebar Mount Set The Cycra U-Clamp mounting system features a four bolt design which provides maximum bite to secure your Probend handguards to the handlebars.
Category: automotive > motorcycle & powersports > parts > controls > hand controls > handlebars & components | Brand: Cycra | Merchant: Cycle Gear

Applied Factory R/S Triple Clamp Set With Pro Taper Contour Handlebar Combo

Applied Factory R/S Triple Clamp Set With Pro Taper Contour Handlebar Combo

$474.98
View Product


The MotoSport.com Applied Factory R/S Triple Clamp Set With Pro Taper Contour Handlebar Combo includes one each of the following:Applied Factory R/S Triple Clamp Set With Oversized Bar Mounts:The new RS line is unlike any on the market today. The rubber / solid design is the best of both worlds.For oversized bars.Superior system to the previous conical-shaped bushings.Proprietary urethane elastomer bushings provide excellent vibration damping characteristics; this strong and abrasion-resistant formula withstands over 2200 PSI.The elastomer bushings are contained in machined pockets on the top clamp, then precision machined.Stainless steel collars are inserted into the elastomer bushings providing a mechanical restraint while still isolating the bar mounts from vibration.The bar mount is then secured with a strong grade 10.9 bolt.The proper torque secures the bar mount and pre-loads the elastomer bushings; pre-load ensures the bushings completely fill the pockets and isolate the bar mounts.Also included in the kit is a set of 6061 aluminum bushings; these precision-machined solid bushings fit into the pockets in place of the elastomer bushings and create a solid mount system.Feature offset mounting holes for adjusting handlebar location.Top it off with the included one-piece bar clamp to tie both mounts together and you have a twist-free rubber or solid system.Includes R/S top triple clamp, R/S bottom triple clamp, elastomer and solid bushings, bar mounts, one-piece bar clamp, and hardware.Lifetime warranty.Made in the USA! Note: Includes Oversized 1-1/8"" Bar Mounts.Pro Taper Contour Handlebars - Oversize 1-1/8"":In 1991, Pro Taper introduced the 1-1/8-inch Taperwall handlebar and the industry hasn't been the same since. The Corona, CA based company expanded its product line to include clutches, sprockets and grips, among others, but Pro Taper never turned its back on what landed them in the motocross world.The Pro Taper Contour Handlebar - Oversized is a best seller and made with the same quality as its Standard 7/8-inch Pro Taper brother, it's just, well, oversized! Check out the features that come with this solid beast and you'll understand why it's a must-have on the race course by riders like Nate Adams, Levi Sherwood and Robbie Maddison.Made with aerospace-grade aluminum and 5 mm wall tubing.Chemically applied scratch and peel-resistant graphics.Knurled clutch side for secure grip hold.1/4"" cut guides for precise width modification.Includes high-density molded pad.Bend and color for every application.
Category: automotive > motorcycle & powersports > parts > controls > hand controls > handlebars & components | Brand: Applied | Merchant: MotoSport

Applied R/S Triple Clamp Kit With Pro Taper Contour Handlebar Combo

Applied R/S Triple Clamp Kit With Pro Taper Contour Handlebar Combo

$270.98
View Product


The MotoSport.com Applied R/S Triple Clamp Kit With Pro Taper Contour Handlebar Combo includes one each of the following:Applied R/S Triple Clamp Kit With Oversized Bar Mounts:The new RS line is unlike any on the market today. The rubber / solid design is the best of both worlds.For oversized bars.Superior system to the previous conical-shaped bushings.Proprietary urethane elastomer bushings provide excellent vibration damping characteristics; this strong and abrasion-resistant formula withstands over 2200 PSI.The elastomer bushings are contained in machined pockets on the top clamp, then precision machined.Stainless steel collars are inserted into the elastomer bushings providing a mechanical restraint while still isolating the bar mounts from vibration.The bar mount is then secured with a strong grade 10.9 bolt.The proper torque secures the bar mount and pre-loads the elastomer bushings; pre-load ensures the bushings completely fill the pockets and isolate the bar mounts.Also included in the kit is a set of 6061 aluminum bushings; these precision-machined solid bushings fit into the pockets in place of the elastomer bushings and create a solid mount system.Feature offset mounting holes for adjusting handlebar location.Top it off with the included one-piece bar clamp to tie both mounts together and you have a twist-free rubber or solid system.Includes R/S top triple clamp, R/S bottom triple clamp, elastomer and solid bushings, bar mounts, one-piece bar clamp, and hardware.Lifetime warranty.Made in the U.S.A.Note: Clamp has same offset and height as O.E.M.Pro Taper Contour Handlebars - Oversize 1-1/8"":In 1991, Pro Taper introduced the 1-1/8-inch Taperwall handlebar and the industry hasn't been the same since. The Corona, CA based company expanded its product line to include clutches, sprockets and grips, among others, but Pro Taper never turned its back on what landed them in the motocross world.The Pro Taper Contour Handlebar - Oversized is a best seller and made with the same quality as its Standard 7/8-inch Pro Taper brother, it's just, well, oversized! Check out the features that come with this solid beast and you'll understand why it's a must-have on the race course by riders like Nate Adams, Levi Sherwood and Robbie Maddison.Made with aerospace-grade aluminum and 5 mm wall tubing.Chemically applied scratch and peel-resistant graphics.Knurled clutch side for secure grip hold.1/4"" cut guides for precise width modification.Includes high-density molded pad.Bend and color for every application.
Category: automotive > motorcycle & powersports > parts > controls > hand controls > handlebars & components | Brand: Applied | Merchant: MotoSport

Hitch Bar w/Adjustable Ball Mount - 12

Hitch Bar w/Adjustable Ball Mount - 12" Length

$269.00
View Product


On-the-vehicle adjustment of ball height through 6 3/4" range, and ball angle through 15 degree range. Allows change for different trailers or towing same trailer with different vehicles. No-weld construction. USA.
Category: automotive > exterior accessories > towing products & winches > hitches > receivers | Brand: CEQUENT PERFORMANCE PRODUCTS 1 | Merchant: Camping World

Turner Performance Products Oversized Bar Mounts With Pro Taper Evo Handlebar Combo

Turner Performance Products Oversized Bar Mounts With Pro Taper Evo Handlebar Combo

$152.97
View Product


Made with Aerospace 2050 aluminum. New chemically applied ""un-sticker graphics."" Knurled clutch side for secure grip hold. 1/4"" cut guides for precise modification. Includes new high-density molded pad.""Solid Mounts"" bolt on top of stock 7/8"" bar mounts, and adds 1/4"" rise.""Rubber Mounts"" replace the stock bar mounts on CR/CRF, KX/KXF and RMZ models.
Category: automotive > motorcycle & powersports > parts > controls > handlebars | Brand: Turner Performance Products | Merchant: MotoSport

Moose Universal Oversized Bar Mounts

Moose Universal Oversized Bar Mounts

$57.95
View Product


Adapts 7/8"" bar mounts to accept oversize (1 1/8"") handlebars.An economical alternative to replacing expensive top triple clamps.Available in three sizes raising handlebars 20mm-50mm from stock setting.Includes mounting bolts and handlebar pad.
Category: automotive > exterior accessories > towing products & winches | Brand: Moose | Merchant: MotoSport

Applied Factory R/S Triple Clamp Set With Oversized Bar Mounts

Applied Factory R/S Triple Clamp Set With Oversized Bar Mounts

$399.99
View Product


The new RS line is unlike any on the market today. The rubber / solid design is the best of both worlds.Superior system to the previous conical-shaped bushings.Proprietary urethane elastomer bushings provide excellent vibration damping characteristics; this strong and abrasion-resistant formula withstands over 2200 PSI. The elastomer bushings are contained in machined pockets on the top clamp, then precision machined. Stainless steel collars are inserted into the elastomer bushings providing a mechanical restraint while still isolating the bar mounts from vibration. The bar mount is then secured with a strong grade 10.9 bolt. The proper torque secures the bar mount and pre-loads the elastomer bushings; pre-load ensures the bushings completely fill the pockets and isolate the bar mounts. Also included in the kit is a set of 6061 aluminum bushings; these precision machined solid bushings fit into the pockets in place of the elastomer bushings and create a solid mount system.For oversized bars.Feature offset mounting holes for adjusting handlebar location. Top it off with the included one piece bar clamp to tie both mounts together and you have a twist-free rubber or solid system. Includes R/S top triple clamp, R/S bottom triple clamp, elastomer and solid bushings, bar mounts, one piece bar clamp, and hardware. Made in the USA!
Category: automotive > motorcycle & powersports > accessories > handlebar accessories | Brand: Applied | Merchant: MotoSport

Applied R/S Triple Clamp Kit With Oversized Bar Mounts

Applied R/S Triple Clamp Kit With Oversized Bar Mounts

$195.99
View Product


The new RS line is unlike any on the market today. The rubber / solid design is the best of both worlds.Superior system to the previous conical-shaped bushings.Proprietary urethane elastomer bushings provide excellent vibration damping characteristics; this strong and abrasion-resistant formula withstands over 2200 PSI. The elastomer bushings are contained in machined pockets on the top clamp, then precision machined. Stainless steel collars are inserted into the elastomer bushings providing a mechanical restraint while still isolating the bar mounts from vibration. The bar mount is then secured with a strong grade 10.9 bolt. The proper torque secures the bar mount and pre-loads the elastomer bushings; pre-load ensures the bushings completely fill the pockets and isolate the bar mounts. Also included in the kit is a set of 6061 aluminum bushings; these precision machined solid bushings fit into the pockets in place of the elastomer bushings and create a solid mount system.For oversized bars.Feature offset mounting holes for adjusting handlebar location. Top it off with the included one piece bar clamp to tie both mounts together and you have a twist-free rubber or solid system. Includes R/S top triple clamp, elastomer and solid bushings, bar mounts, one piece bar clamp, and hardware. Made in the U.S.A.Notes: Includes Oversized 1-1/8"" Bar Mounts. Clamp has same offset and height as O.E.M. Requires headlight / odometer adapter kit.
Category: automotive > motorcycle & powersports > accessories > handlebar accessories | Brand: Applied | Merchant: MotoSport

Joker Machine Handlebar Mount for Pro Taper or Renthal Fat Bars

Joker Machine Handlebar Mount for Pro Taper or Renthal Fat Bars

$99.99
View Product


These bar mounts enable you to adapt ""tapered style motorcross bars"" - (1-1/8"" center diameter to 7/8"" diameter grip area) - to any H-D top triple clamps They are fully CNC-machined from 6061-T6 billet aluminum, then anodized (clear on the top and hard black on the bottom) Aircraft style gold tone clamp bolts make for a trick look Base sections have an offset 1/2""-13 thread to enable forward or backward mounting Mounting bolt spacing is HD's 3-1/2"" apart
Category: automotive > motorcycle & powersports > parts > controls > hand controls > handlebars & components | Brand: Joker Machine | Merchant: J&P Cycles