Rockshox 0.5X0.5 Rear Shock Bushing Tool

Rockshox 0.5X0.5 Rear Shock Bushing Tool
$20.00

Shop Now

Rockshox 0.5X0.5 Rear Shock Bushing Tool
The Rockshox 0.5X0.5 Rear Shock Bushing Tool removes and installs all Rockshox 1/2mm rear shock eyelet bushing and mounting hardware. Nothing else will do. Rockshox 0.5X0.5 Rear Shock Bushing Tool Specifications: Genuine Rockshox toolWidth: 35mmManufacture Part #: 00.4315.026.010
Category: sports & outdoors > cycling > parts & components > suspension Brand: Rockshox
Jenson USA
$20.00
Shop Now


Similar Products:

CONICAL TOOL C-1213 Tapered End Mill, HSS,0.75in,5-3/4in L,RH G0140449

CONICAL TOOL C-1213 Tapered End Mill, HSS,0.75in,5-3/4in L,RH G0140449

$148.00
View Product


Tapered End Mill, Shank Type Single Weldon, Dimension Type Fractional Inch, Tip Dia. 0.75 In, Large End Dia. 1.091 In, Number of Flutes 3,High Speed Steel, Uncoated Finish, Taper Angle Per Side 3.0 Degrees, Included Angle 6.0 Degrees, Shank Dia. 1 In, Length of Cut 3-1/4 In, Overall Length 5-3/4 In, Spiral Direction Right Hand, Cutting Direction Right Hand, Helix Angle 30 DegreesFeaturesFinish: UncoatedItem: Tapered End MillNumber of Flutes: 3Overall Length: 5-3/4"Shank Type: Single WeldonLarge End Dia.: 1.091"Shank Dia.: 1"Cutting Direction: Right HandLength of Cut: 3-1/4"Helix Angle: 30 DegreesIncluded Angle: 6 DegreesDimension Type: Fractional InchSpiral Direction: Right HandTaper Angle Per Side: 3.0 DegreesTip Diameter: 0.750"End Mill Material: High Speed SteelEnd Mill Cutting Type: Center
Category: tools & home improvement > power & hand tools > power tool accessories > router accessories > router bits > spiral bits | Brand: CONICAL TOOL | Merchant: Walmart US

Otc 4245 Rear Suspension Bushing Master Kit

Otc 4245 Rear Suspension Bushing Master Kit

$1024.17
View Product


Cut service time dramatically Removes FAS II Airliner Freightliner Rear Suspension bushings in a fraction of the time of traditional methods. Handles Neway AD Series Truck and Tractor suspension bushings. Saves on average 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing. 15-ton capacity cylinder. 2510A air/hydraulic pump.
Category: automotive > replacement parts > shocks struts & suspension > control arms & parts > bushing kits | Brand: OTC Tools | Merchant: Walmart US

CONICAL TOOL B-413 Tapered End Mill, HSS,0.25in,5-1/2in L,RH G0141121

CONICAL TOOL B-413 Tapered End Mill, HSS,0.25in,5-1/2in L,RH G0141121

$58.66
View Product


Tapered End Mill, Shank Type Single Weldon, Dimension Type Fractional Inch, Tip Dia. 0.25 In, Large End Dia. 0.477 In, Number of Flutes 3,High Speed Steel, Uncoated Finish, Taper Angle Per Side 2.0 Degrees, Included Angle 4.0 Degrees, Shank Dia. 1/2 In, Length of Cut 3-1/4 In, Overall Length 5-1/2 In, Spiral Direction Right Hand, Cutting Direction Right Hand, Helix Angle 30 DegreesFeaturesFinish: UncoatedItem: Tapered End MillNumber of Flutes: 3Overall Length: 5-1/2"Shank Type: Single WeldonLarge End Dia.: 0.477"Shank Dia.: 1/2"Cutting Direction: Right HandLength of Cut: 3-1/4"Helix Angle: 30 DegreesIncluded Angle: 4 DegreesDimension Type: Fractional InchSpiral Direction: Right HandTaper Angle Per Side: 2.0 DegreesTip Diameter: 0.250"End Mill Material: High Speed SteelEnd Mill Cutting Type: Center
Category: tools & home improvement > power & hand tools > power tool accessories > router accessories > router bits > spiral bits | Brand: CONICAL TOOL | Merchant: Walmart US

CONICAL TOOL E-613 Tapered End Mill, HSS,0.375in,5-1/2inL, RH G0139679

CONICAL TOOL E-613 Tapered End Mill, HSS,0.375in,5-1/2inL, RH G0139679

$103.00
View Product


Tapered End Mill, Shank Type Single Weldon, Dimension Type Fractional Inch, Tip Dia. 0.375 In, Large End Dia. 0.944 In, Number of Flutes 3,High Speed Steel, Uncoated Finish, Taper Angle Per Side 5.0 Degrees, Included Angle 10.0 Degrees, Shank Dia. 3/4 In, Length of Cut 3-1/4 In, Overall Length 5-1/2 In, Spiral Direction Right Hand, Cutting Direction Right Hand, Helix Angle 30 DegreesFeaturesFinish: UncoatedItem: Tapered End MillNumber of Flutes: 3Overall Length: 5-1/2"Shank Type: Single WeldonLarge End Dia.: 0.944"Shank Dia.: 3/4"Cutting Direction: Right HandLength of Cut: 3-1/4"Helix Angle: 30 DegreesIncluded Angle: 10 DegreesDimension Type: Fractional InchSpiral Direction: Right HandTaper Angle Per Side: 5.0 DegreesTip Diameter: 0.375"End Mill Material: High Speed SteelEnd Mill Cutting Type: Center
Category: industrial & scientific > cutting tools > milling tools > end mills | Brand: CONICAL TOOL | Merchant: Walmart US

CONICAL TOOL A-1213 Tapered End Mill, HSS,0.75in,5-3/4in L,RH G0141760

CONICAL TOOL A-1213 Tapered End Mill, HSS,0.75in,5-3/4in L,RH G0141760

$84.71
View Product


Tapered End Mill, Shank Type Single Weldon, Dimension Type Fractional Inch, Tip Dia. 0.75 In, Large End Dia. 0.863 In, Number of Flutes 3,High Speed Steel, Uncoated Finish, Taper Angle Per Side 1.0 Degrees, Included Angle 2.0 Degrees, Shank Dia. 3/4 In, Length of Cut 3-1/4 In, Overall Length 5-3/4 In, Spiral Direction Right Hand, Cutting Direction Right Hand, Helix Angle 30 DegreesFeaturesFinish: UncoatedItem: Tapered End MillNumber of Flutes: 3Overall Length: 5-3/4"Shank Type: Single WeldonLarge End Dia.: 0.863"Shank Dia.: 3/4"Cutting Direction: Right HandLength of Cut: 3-1/4"Helix Angle: 30 DegreesIncluded Angle: 2 DegreesDimension Type: Fractional InchSpiral Direction: Right HandTaper Angle Per Side: 1.0 DegreesTip Diameter: 0.750"End Mill Material: High Speed SteelEnd Mill Cutting Type: Center
Category: tools & home improvement > power & hand tools > power tool accessories > router accessories > router bits > spiral bits | Brand: CONICAL TOOL | Merchant: Walmart US

CONICAL TOOL AAX-613 Tapered End Mill, HSS,0.375in,5-1/2inL, RH G0141456

CONICAL TOOL AAX-613 Tapered End Mill, HSS,0.375in,5-1/2inL, RH G0141456

$56.19
View Product


Tapered End Mill, Shank Type Single Weldon, Dimension Type Fractional Inch, Tip Dia. 0.375 In, Large End Dia. 0.545 In, Number of Flutes 3,High Speed Steel, Uncoated Finish, Taper Angle Per Side 1.5 Degrees, Included Angle 3.0 Degrees, Shank Dia. 5/8 In, Length of Cut 3-1/4 In, Overall Length 5-1/2 In, Spiral Direction Right Hand, Cutting Direction Right Hand, Helix Angle 30 DegreesFeaturesFinish: UncoatedItem: Tapered End MillNumber of Flutes: 3Overall Length: 5-1/2"Shank Type: Single WeldonLarge End Dia.: 0.545"Shank Dia.: 5/8"Cutting Direction: Right HandLength of Cut: 3-1/4"Helix Angle: 30 DegreesIncluded Angle: 3 DegreesDimension Type: Fractional InchSpiral Direction: Right HandTaper Angle Per Side: 1.5 DegreesTip Diameter: 0.375"End Mill Material: High Speed SteelEnd Mill Cutting Type: Center
Category: industrial & scientific > cutting tools > milling tools > end mills | Brand: CONICAL TOOL | Merchant: Walmart US

Rockshox Monarch Plus RC3 DB Rear Shock

Rockshox Monarch Plus RC3 DB Rear Shock

$510.00
View Product


Ready to roll, the Rockshox Monarch shock is ready for some big hits. Whether you're an enduro guru or seeking to crush that technical course all for the sake of bragging rights, we get it you need a rear shock to smooth out the bumps along the way. Weight: 335g (based on RC3 216x63mm, standard air can, no hardware) Damping: External rebound, 3-position compression (Open, Pedal, Lock) Configurations:190x51mm, 200x51mm, 200x57mm, 216x63mmRebound Damping: Rapid RecoverySpring: DebonAir, High Volume Solo Air, Standard SoloSpring Adjust: Air pressure via single schrader valveShaft Material: 7075 aluminumBody Material: Hard anodized, forged aluminum with sag gradientsBody Finish: Fast Black
Category: sports & outdoors > cycling > parts & components > suspension | Brand: Rockshox | Merchant: Jenson USA

Icon Suspension 0 -1.5 Inch Rear 2.0 Rear Shock 56503 Shock Absorbers

Icon Suspension 0 -1.5 Inch Rear 2.0 Rear Shock 56503 Shock Absorbers

$159.99
View Product


0 -1.5 Inch Rear 2.0 Rear Shock Fits 2005 to 2015 Toyota Tacoma;2.0 Aluminum Series Shock;0-1.5 in. Lift;All Required Hardware;Sold individually TOYOTA TACOMA BASE PRE RUNNER TRD PRO X-RUNNER 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2.7L 2TRFE (2694cc) 4L 1GRFE (3956cc) GAS Icon Suspension 0 -1.5 Inch Rear 2.0 Rear Shock 56503 Shock Absorbers
Category: automotive > performance parts & accessories > shocks struts & suspension > shocks & struts | Brand: Icon Suspension | Merchant: 4 Wheel Parts

Icon Suspension 0 -1.5 Inch Rear 2.0 Remote Reservoir Shock 56503R Shock Absorbers

Icon Suspension 0 -1.5 Inch Rear 2.0 Remote Reservoir Shock 56503R Shock Absorbers

$264.99
View Product


0 -1.5 Inch Rear 2.0 Remote Reservoir Shock Fits 2005 to 2015 Toyota Tacoma;2.0 Aluminum Series Remote Reservoir Shock;0-1.5 in. Lift;All Required Hardware;Sold individually TOYOTA TACOMA BASE PRE RUNNER TRD PRO X-RUNNER 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2.7L 2TRFE (2694cc) 4L 1GRFE (3956cc) GAS Icon Suspension 0 -1.5 Inch Rear 2.0 Remote Reservoir Shock 56503R Shock Absorbers
Category: automotive > performance parts & accessories > shocks struts & suspension > shocks & struts | Brand: Icon Suspension | Merchant: 4 Wheel Parts

Rock Shox Rear Shock Hardware

Rock Shox Rear Shock Hardware

$12.00
View Product


RockShox mounting hardware kits for Monarch and Vivid Shocks. Fits all current RockShox rear shocks except the BAR. The 1/2 ? x ? eyelet size will work with Fox and Marzocchi hardware. 2 Kits required per rear shock. Sizing opt...
Category: sports & outdoors > cycling > parts & components > suspension | Brand: Rockshox | Merchant: Jenson USA

Rockshox Vivid R2C Rear Shock

Rockshox Vivid R2C Rear Shock

$460.00
View Product


With a combination of extreme durability and precise adjustment, the Rockshox Vivid R2C Rear Shock makes a great choice when upgrading your downhill or freeride rig. RockShox introduces a new technology they are calling Counter Measure. This gives the rear wheel extremely light small bump sensitivity without sacrificing traction. Traction was also considered as Rockshocks developed the Rapid Recovery system. This allows the shock to ride high in it's stroke and spring curve giving the rider more wheel travel hit after hit. Nothing packs up, resulting in a more efficient ride with more rear tire traction. RockShox DFA (Dual Flow Adjust) puts control of the Vivid R2C's dual independent damping circuits at the riders fingertips. Fine tune it how you like and be able to handle the big hits and also stay smooth through the small stuff. Features: Spring must be purchased separatelyCounter Measure for zero force stroke initiationSwitch for on the fly toggle between full and open compressionLaser-etched controlsItem includes: Pump, Cable Tie, Star Nut, Servcie Kit SPECIFICATIONS Damping External beginning stroke rebound, ending stroke rebound, low speed compression
Category: sports & outdoors > cycling > parts & components > suspension | Brand: Rockshox | Merchant: Jenson USA

LTI Tools 1500E Torque Sockets, 0. 7 5 inch, 1 9 mm. -80 Ft - Lbs, Blue

LTI Tools 1500E Torque Sockets, 0. 7 5 inch, 1 9 mm. -80 Ft - Lbs, Blue

$26.51
View Product


Torque Socket 0-75 in, 19 mm -80 Ft lbs- Blue Wheel Torque Master Sockets will torque wheel nuts to the correct torque the first time, every time, on most makes and models of Foreign and Domestic cars, light trucks, SUVss and vans- Torque Master Sockets are easy to use and are color coded for quick identification- Using a torque socket avoids over-torquing wheel nuts and prevents major wheel and brake damage- These tools are designed for use with a 0-5 in- drive impact wrench- Item Weight - 0-800 lbs- SKU: MDCO13093
Category: tools & home improvement > power & hand tools > hand tools > multitools & accessories > multitools | Brand: LTI Tools | Merchant: Walmart US

FOX 2.0 PERF IFP REAR SHOCK, 0-1.5 LIFT, 05-15 TOYOTA HILUX - FOX-985-24-071

FOX 2.0 PERF IFP REAR SHOCK, 0-1.5 LIFT, 05-15 TOYOTA HILUX - FOX-985-24-071

$129.95
View Product


FOX 2.0 PERF IFP REAR SHOCK, 0-1.5 LIFT, 05-15 TOYOTA HILUX - FOX-985-24-071
Category: automotive > replacement parts > shocks struts & suspension > shocks & struts | Brand: Fox Racing | Merchant: Morris 4x4 Center

CONICAL TOOL E-313 Tapered End Mill, HSS,0.188in,5-1/2inL, RH G0139800

CONICAL TOOL E-313 Tapered End Mill, HSS,0.188in,5-1/2inL, RH G0139800

$85.87
View Product


Tapered End Mill, Shank Type Single Weldon, Dimension Type Fractional Inch, Tip Dia. 0.188 In, Large End Dia. 0.756 In, Number of Flutes 3,High Speed Steel, Uncoated Finish, Taper Angle Per Side 5.0 Degrees, Included Angle 10.0 Degrees, Shank Dia. 3/4 In, Length of Cut 3-1/4 In, Overall Length 5-1/2 In, Spiral Direction Right Hand, Cutting Direction Right Hand, Helix Angle 30 DegreesFeaturesFinish: UncoatedItem: Tapered End MillNumber of Flutes: 3Overall Length: 5-1/2"Shank Type: Single WeldonLarge End Dia.: 0.756"Shank Dia.: 3/4"Cutting Direction: Right HandLength of Cut: 3-1/4"Helix Angle: 30 DegreesIncluded Angle: 10 DegreesDimension Type: Fractional InchSpiral Direction: Right HandTaper Angle Per Side: 5.0 DegreesTip Diameter: 0.188"End Mill Material: High Speed SteelEnd Mill Cutting Type: Center
Category: industrial & scientific > cutting tools > milling tools > end mills | Brand: CONICAL TOOL | Merchant: Walmart US

CONICAL TOOL D-613 Tapered End Mill, HSS,0.375in,5-1/2inL, RH G0140187

CONICAL TOOL D-613 Tapered End Mill, HSS,0.375in,5-1/2inL, RH G0140187

$89.07
View Product


Tapered End Mill, Shank Type Single Weldon, Dimension Type Fractional Inch, Tip Dia. 0.375 In, Large End Dia. 0.83 In, Number of Flutes 3,High Speed Steel, Uncoated Finish, Taper Angle Per Side 4.0 Degrees, Included Angle 8.0 Degrees, Shank Dia. 3/4 In, Length of Cut 3-1/4 In, Overall Length 5-1/2 In, Spiral Direction Right Hand, Cutting Direction Right Hand, Helix Angle 30 DegreesFeaturesFinish: UncoatedItem: Tapered End MillNumber of Flutes: 3Overall Length: 5-1/2"Shank Type: Single WeldonLarge End Dia.: 0.83"Shank Dia.: 3/4"Cutting Direction: Right HandLength of Cut: 3-1/4"Helix Angle: 30 DegreesIncluded Angle: 8 DegreesDimension Type: Fractional InchSpiral Direction: Right HandTaper Angle Per Side: 4.0 DegreesTip Diameter: 0.375"End Mill Material: High Speed SteelEnd Mill Cutting Type: Center
Category: industrial & scientific > cutting tools > milling tools > end mills | Brand: CONICAL TOOL | Merchant: Walmart US

BRAKE LINE,0-2.5 INCH,REAR, Stainless STEEL,SINGLE,Skyjacker - SJ-RBL402

BRAKE LINE,0-2.5 INCH,REAR, Stainless STEEL,SINGLE,Skyjacker - SJ-RBL402

$55.47
View Product


BRAKE Line, 0-2.5 INCH, REAR, Stainless STEEL, SINGLE, Skyjacker - SJ-RBL402
Category: sports & outdoors > cycling > parts & components > bike brakes & parts > brakes | Brand: Skyjacker | Merchant: Morris 4x4 Center

CONICAL TOOL AX-813 Tapered End Mill, HSS,0.5in,5-3/8in L,RH G0142138

CONICAL TOOL AX-813 Tapered End Mill, HSS,0.5in,5-3/8in L,RH G0142138

$54.88
View Product


Tapered End Mill, Shank Type Single Weldon, Dimension Type Fractional Inch, Tip Dia. 0.5 In, Large End Dia. 0.557 In, Number of Flutes 3,High Speed Steel, Uncoated Finish, Taper Angle Per Side 0.5 Degrees, Included Angle 1.0 Degrees, Shank Dia. 1/2 In, Length of Cut 3-1/4 In, Overall Length 5-3/8 In, Spiral Direction Right Hand, Cutting Direction Right Hand, Helix Angle 30 DegreesFeaturesFinish: UncoatedItem: Tapered End MillNumber of Flutes: 3Overall Length: 5-3/8"Shank Type: Single WeldonLarge End Dia.: 0.557"Shank Dia.: 1/2"Cutting Direction: Right HandLength of Cut: 3-1/4"Helix Angle: 30 DegreesIncluded Angle: 1 DegreesDimension Type: Fractional InchSpiral Direction: Right HandTaper Angle Per Side: 0.5 DegreesTip Diameter: 0.500"End Mill Material: High Speed SteelEnd Mill Cutting Type: Center
Category: tools & home improvement > power & hand tools > power tool accessories > router accessories > router bits > spiral bits | Brand: CONICAL TOOL | Merchant: Walmart US

CONICAL TOOL C-313 Tapered End Mill, HSS,0.188in,5-1/2inL, RH G0140701

CONICAL TOOL C-313 Tapered End Mill, HSS,0.188in,5-1/2inL, RH G0140701

$63.54
View Product


Tapered End Mill, Shank Type Single Weldon, Dimension Type Fractional Inch, Tip Dia. 0.188 In, Large End Dia. 0.528 In, Number of Flutes 3,High Speed Steel, Uncoated Finish, Taper Angle Per Side 3.0 Degrees, Included Angle 6.0 Degrees, Shank Dia. 5/8 In, Length of Cut 3-1/4 In, Overall Length 5-1/2 In, Spiral Direction Right Hand, Cutting Direction Right Hand, Helix Angle 30 DegreesFeaturesFinish: UncoatedItem: Tapered End MillNumber of Flutes: 3Overall Length: 5-1/2"Shank Type: Single WeldonLarge End Dia.: 0.528"Shank Dia.: 5/8"Cutting Direction: Right HandLength of Cut: 3-1/4"Helix Angle: 30 DegreesIncluded Angle: 6 DegreesDimension Type: Fractional InchSpiral Direction: Right HandTaper Angle Per Side: 3.0 DegreesTip Diameter: 0.188"End Mill Material: High Speed SteelEnd Mill Cutting Type: Center
Category: industrial & scientific > cutting tools > milling tools > end mills | Brand: CONICAL TOOL | Merchant: Walmart US

CONICAL TOOL A-413 Tapered End Mill, HSS,0.25in,5-1/2in L,RH G0141867

CONICAL TOOL A-413 Tapered End Mill, HSS,0.25in,5-1/2in L,RH G0141867

$51.50
View Product


Tapered End Mill, Shank Type Single Weldon, Dimension Type Fractional Inch, Tip Dia. 0.25 In, Large End Dia. 0.363 In, Number of Flutes 3,High Speed Steel, Uncoated Finish, Taper Angle Per Side 1.0 Degrees, Included Angle 2.0 Degrees, Shank Dia. 1/2 In, Length of Cut 3-1/4 In, Overall Length 5-1/2 In, Spiral Direction Right Hand, Cutting Direction Right Hand, Helix Angle 30 DegreesFeaturesFinish: UncoatedItem: Tapered End MillNumber of Flutes: 3Overall Length: 5-1/2"Shank Type: Single WeldonLarge End Dia.: 0.363"Shank Dia.: 1/2"Cutting Direction: Right HandLength of Cut: 3-1/4"Helix Angle: 30 DegreesIncluded Angle: 2 DegreesDimension Type: Fractional InchSpiral Direction: Right HandTaper Angle Per Side: 1.0 DegreesTip Diameter: 0.250"End Mill Material: High Speed SteelEnd Mill Cutting Type: Center
Category: tools & home improvement > power & hand tools > power tool accessories > router accessories > router bits > spiral bits | Brand: CONICAL TOOL | Merchant: Walmart US

FOX 2.0 PERF IFP Rear SHOCK, 0-1.5 LIFT, 05-15 TOYOTA HILUX - FOX-985-24-071

FOX 2.0 PERF IFP Rear SHOCK, 0-1.5 LIFT, 05-15 TOYOTA HILUX - FOX-985-24-071

$129.95
View Product


FOX 2.0 PERF IFP Rear SHOCK, 0-1.5 LIFT, 05-15 TOYOTA HILUX - FOX-985-24-071
Category: automotive > replacement parts > shocks struts & suspension > shocks & struts | Brand: Fox Racing | Merchant: Morris 4x4 Center

K Tool International KTI56203 Professional Crimping Tool - 0.2/1.5/2.5/4.0/6.0 Mm2

K Tool International KTI56203 Professional Crimping Tool - 0.2/1.5/2.5/4.0/6.0 Mm2

$40.48
View Product


Features and Benefits Crimps non-insulated terminals Easy to grip handles;
Category: tools & home improvement > power & hand tools > hand tools | Brand: K Tool International | Merchant: Walmart US

KYB Rear Shock Bushing - SM5051

KYB Rear Shock Bushing - SM5051

$9.49
View Product


KYB Corporation produces a variety of ride control, hydraulic, and electronic products for use as original equipment and replacement parts in automobiles, motorcycles, trucks, specialty vehicles, buses, aircraft, railroad cars, industrial applications, agricultural applications, and civil engineering projects. KYBas global headquarters is located in Tokyo, Japan. By consistently developing world class ride control products, KYB has become the world's largest supplier of OE and aftermarket shocks and struts. In fact, more than 1 in 5 vehicles built around the world use KYB shocks and struts. KYB has 32 facilities in 21 countries, and 15 manufacturing plants in Asia, the United States, and Europe. While much of KYB's overall sales are from automotive shock absorbers, KYB also produces a wide range of hydraulic and electronic equipment used in a variety of applications in many aspects of modern life. Vehicular and transportation applications include power steering systems, automotive electronics, construction equipment, agricultural equipment, special use vehicles, railroading, aircraft, and maritime shipping. Other KYB product applications include hydraulic equipment used in manufacturing, testing, lifestyle, and civil engineering projects, as well as special needs equipment such as wheelchairs. The varied uses and applications of KYB products and equipment demonstrate our commitment to helping create a safer, more efficient, and more comfortable society. Ride Comfort is important, but restoring a vehicleas Ride Control; stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks & Struts are designed for the most important performance purpose: Restore the vehicleas original capabilities. KYB is the worldas largest supplier of shocks and struts to new vehicle manufacturers. The Excel-G is made on the same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That earned Excel-G this classification: OEA (Original Equipment for the Aftermarket ) . The KYB Excel-G is a Nitrogen gas-charged twin-tube design that includes every quality component that our global OEM products include. Product Features: A seamless working cylinder vs. welded seams provides the best sealing surface throughout the entire piston stroke Precision multi-stage hydraulic valves that reduces fluid travel to minimize aeration and are calibrated the way OE intended the vehicle to perform Triple chrome-plated piston rod and multi-lip oil seals that reduce wear Solid, seamless mounting eye rings and bolt bushings that canat separate and become noisy Chemically bonded insulator mounting bushings that wonat slip out A Teflon coated or phenolic piston band that reduces friction and provides a positive cylinder seal Specially formulated hydraulic fluid with multi-range viscosity for any weather climate. Most Suspension Parts products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > shocks struts & suspension > shocks & struts | Brand: KYB | Merchant: Advance Auto Parts

Icon Suspension 0 - 1 Inch Rear 2.0 Aluminum Series Rear Shock 96518 Shock Absorbers

Icon Suspension 0 - 1 Inch Rear 2.0 Aluminum Series Rear Shock 96518 Shock Absorbers

$159.99
View Product


0 - 1 Inch Rear 2.0 Aluminum Series Rear Shock Fits 2015 to 2016 Ford F150;4WD and 2WD models;Rear 2.0 Aluminum Series Rear Shock;0-1 in. Lift;Incl. Rear shock;All Required Hardware;Sold individually FORD F-150 KING RANCH LARIAT LIMITED PLATINUM XL XLT 2015 2016 2.7L (EcoBoost) 3.5L (3496cc) (Duratec) 3.5L 99G (3496cc) (EcoBoost) 5L (302) 6.2L Triton (379) FLEX GAS Icon Suspension 0 - 1 Inch Rear 2.0 Aluminum Series Rear Shock 96518 Shock Absorbers
Category: automotive > performance parts & accessories > shocks struts & suspension > shocks & struts | Brand: Icon Suspension | Merchant: 4 Wheel Parts

Icon Suspension 0 -1.5 Inch Rear 2.5 Aluminum Shock Kit 57620P Shock Absorbers

Icon Suspension 0 -1.5 Inch Rear 2.5 Aluminum Shock Kit 57620P Shock Absorbers

$659.99
View Product


0 -1.5 Inch Rear 2.5 Aluminum Shock Kit Fits 2007 to 2015 Toyota Tundra;2.5 Aluminum Series Shock Kit;0-1.5 in. Lift;All Required Hardware;Sold as a pair TOYOTA TUNDRA 1794 EDITION BASE LIMITED PLATINUM SR SR5 TRD PRO 2007 2008 2009 2010 2011 2012 2013 2014 2015 4.6L 1URFE (4608cc) 4.7L 2UZFE (4663cc) 4.7L 2UZFE (4663cc) i-Force 4L 1GRFE (3956cc) 5.7L (345) 3URFE i-Force 5.7L (345) FLEX 3URFBE i-Force FLEX GAS Icon Suspension 0 -1.5 Inch Rear 2.5 Aluminum Shock Kit 57620P Shock Absorbers
Category: automotive > performance parts & accessories > shocks struts & suspension > shocks & struts | Brand: Icon Suspension | Merchant: 4 Wheel Parts

CONICAL TOOL A-813 Tapered End Mill, HSS,0.5in,5-1/2in L,RH G0141806

CONICAL TOOL A-813 Tapered End Mill, HSS,0.5in,5-1/2in L,RH G0141806

$59.12
View Product


Tapered End Mill, Shank Type Single Weldon, Dimension Type Fractional Inch, Tip Dia. 0.5 In, Large End Dia. 0.613 In, Number of Flutes 3,High Speed Steel, Uncoated Finish, Taper Angle Per Side 1.0 Degrees, Included Angle 2.0 Degrees, Shank Dia. 1/2 In, Length of Cut 3-1/4 In, Overall Length 5-1/2 In, Spiral Direction Right Hand, Cutting Direction Right Hand, Helix Angle 30 DegreesFeaturesFinish: UncoatedItem: Tapered End MillNumber of Flutes: 3Overall Length: 5-1/2"Shank Type: Single WeldonLarge End Dia.: 0.613"Shank Dia.: 1/2"Cutting Direction: Right HandLength of Cut: 3-1/4"Helix Angle: 30 DegreesIncluded Angle: 2 DegreesDimension Type: Fractional InchSpiral Direction: Right HandTaper Angle Per Side: 1.0 DegreesTip Diameter: 0.500"End Mill Material: High Speed SteelEnd Mill Cutting Type: Center
Category: tools & home improvement > power & hand tools > power tool accessories > router accessories > router bits > spiral bits | Brand: CONICAL TOOL | Merchant: Walmart US

Rockshox Monarch RT3 Rear Shock

Rockshox Monarch RT3 Rear Shock

$370.00
View Product


The Rockshox Monarch RT3 has a new lightweight design and also gets you through the chunky trail segments better than ever. A 3 position lever puts you control and lets you choose between an open, pedal or lock setting so you are ensured the optimal performance for the trail ahead. Lightweight 7075 aluminum material keeps this shock at a minimal gram count and your rig at a racing weight. Rockshox Monarch RT3 Rear Shock Specifications : Weight: 215gDamping: External Rebound, 3 Position Compression (Open/Pedal/Lock) Configurations: 200x51, 7.875""x2.00""Rebound Damping: Rapid RecoverySpring: Standard, High Volume, Standard With High Volume Eyelet, High Volume With High Volume: Eyelet, DebonairSpring Adjust: Air Pressure Via Single Schrader ValveShaft Material: 7075 Aluminum - Fast BlackShaft Diameter: 10mmBody Material: AluminumBody Finish Color Option: WhiteUpgrade Over Rl: 3 Position Floodgate LeverChassis Clear Hard Anodized With Sag Gradients
Category: sports & outdoors > cycling > parts & components > suspension | Brand: Rockshox | Merchant: Jenson USA

CONICAL TOOL AAX-1013 Tapered End Mill, HSS,0.625in,5-1/2inL, RH G0141401

CONICAL TOOL AAX-1013 Tapered End Mill, HSS,0.625in,5-1/2inL, RH G0141401

$76.90
View Product


Tapered End Mill, Shank Type Single Weldon, Dimension Type Fractional Inch, Tip Dia. 0.625 In, Large End Dia. 0.795 In, Number of Flutes 3,High Speed Steel, Uncoated Finish, Taper Angle Per Side 1.5 Degrees, Included Angle 3.0 Degrees, Shank Dia. 3/4 In, Length of Cut 3-1/4 In, Overall Length 5-1/2 In, Spiral Direction Right Hand, Cutting Direction Right Hand, Helix Angle 30 DegreesFeaturesFinish: UncoatedItem: Tapered End MillNumber of Flutes: 3Overall Length: 5-1/2"Shank Type: Single WeldonLarge End Dia.: 0.795"Shank Dia.: 3/4"Cutting Direction: Right HandLength of Cut: 3-1/4"Helix Angle: 30 DegreesIncluded Angle: 3 DegreesDimension Type: Fractional InchSpiral Direction: Right HandTaper Angle Per Side: 1.5 DegreesTip Diameter: 0.625"End Mill Material: High Speed SteelEnd Mill Cutting Type: Center
Category: industrial & scientific > cutting tools > milling tools > end mills | Brand: CONICAL TOOL | Merchant: Walmart US