LUK Automotive Systems Original Equipment Quality Replacement Clutch Kit - 07-140

LUK Automotive Systems Original Equipment Quality Replacement Clutch Kit - 07-140
$209.99

Shop Now

LUK Automotive Systems Original Equipment Quality Replacement Clutch Kit - 07-140
Original Equipment Quality Replacement Clutch Kit. Most Clutch Components products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > transmission & drive train > clutches & parts > complete clutch sets Brand: LUK Automotive Systems
Advance Auto Parts
$209.99
Shop Now


Similar Products:

First Equipment Quality CV Boot Kit, Outer Boot Only - K601034304FEQ

First Equipment Quality CV Boot Kit, Outer Boot Only - K601034304FEQ

$5.81
View Product


First Equipment Quality (FEQ) provides high quality under car products, specifically for rubber and metal items, as well as front wheel drive axles. With global manufacturing facilities being ISO 9001, ISO TS/16949 and ISO 14001 Certified, the processes and quality are maintained to the highest standards providing superior products. (Where applicable, for vehicles with 90mm inner joints) . Most CV Joint Components products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > transmission & drive train > axle > shafts | Brand: First Equipment Quality | Merchant: Advance Auto Parts

Milwaukee Twins Stock Replacement Clutch Kit

Milwaukee Twins Stock Replacement Clutch Kit

$135.99
View Product


Includes 9 Kevlar friction plates a race proven friction material on 6061 T6 aluminum cores 8 tempered steel drive plates Pre-set stack height for easy, accurate installation Made in the USA
Category: automotive > replacement parts > transmission & drive train > clutches & parts > complete clutch sets | Brand: Milwaukee Twins | Merchant: J&P Cycles

LUK Automotive Systems Original Equipment Quality Replacement Clutch Kit - 04-902

LUK Automotive Systems Original Equipment Quality Replacement Clutch Kit - 04-902

$179.99
View Product


Original Equipment Quality Replacement Clutch Kit. Most Clutch Components products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > transmission & drive train > clutches & parts > complete clutch sets | Brand: LUK Automotive Systems | Merchant: Advance Auto Parts

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999339A

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999339A

$179.99
View Product


This Litens belt tensioner is supplied by the original equipment (O.E.) tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer's logo or part number applied to the part) . As with the original equipment part, this replacement tensioner is manufactured in Korea for Kia and Hyundai applications. The aftermarket part maintains the O.E. specified hydraulic actuator, high performance polymer pulley, and the integrated lift feature for ease of installation. Product Features: Manufactured by the original equipment part supplier to insure proper form, fit, and performance. Hydraulic tension activator Installation instructions included. Heavy Duty/Light Weight Polymer Pulley with cap. Professional Mechanics will change this tensioner in approx. 45 minutes Due to the fact that belts and tensioners have similar Original Equipment design life targets, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore doing both together will extend accessory drive life and lower overall labor versus performing these services separately. Most Belt Components products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > belts hoses & pulleys > belts > serpentine | Brand: Litens | Merchant: Advance Auto Parts

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999415A

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999415A

$95.99
View Product


This Litens belt tensioner is manufactured by the original equipment (O.E.) tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer's logo or part number applied to the part) . As with the original equipment part, this replacement tensioner is manufactured in Japan for Toyota Lexus AR engine applications. The tensioner maintains the O.E. round spring technology as well as the internal damping design specified for this application. As with the original tensioner, the part comes equipped with a heavy duty polymer pulley for optimum performance and durability. To assist with belt removal and installation, this tensioner is equipped with a lift feature on the arm. A molded location pin is molded into the base to insure exact installation location. Product Features: Manufactured by the original equipment part supplier to insure proper form, fit, and performance. Internal round spring technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance. Installation instructions included. Heavy Duty Polymer Pulleys Professional Mechanics will change this tensioner in 20 minutes to 1 hour Due to the fact that belts and tensioners have similar Original Equipment design life targets, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore doing both together will extend accessory drive life and lower overall labor versus performing these services separately. Most Belt Components products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > belts hoses & pulleys > belts > serpentine | Brand: Litens | Merchant: Advance Auto Parts

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999295A

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999295A

$81.99
View Product


Litens Automotive is the original equipment (O.E.) supplier of this tensioner for Jaguar applications. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer's logo or part number applied to the part) . This part is manufactured in Canada by Litens to the same exacting specifications as the O.E. part. The tensioner maintains the O.E. round spring technology as well as the internal damping design specified for this application. This tensioner maintains the heavy duty steel pulley specified by the O.E. manufacturer. Product Features: Manufactured by the original equipment part supplier to insure proper form, fit, and performance. Internal round spring technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance. Installation instructions included. Heavy Duty Steel pulley Professional Mechanics will change this tensioner in about 1 hour. Due to the fact that belts and tensioners have similar Original Equipment design life targets, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore doing both together will extend accessory drive life and lower overall labor versus performing these services separately. Most Belt Components products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > belts hoses & pulleys > belts > serpentine | Brand: Litens | Merchant: Advance Auto Parts

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999020A

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999020A

$49.99
View Product


This Litens tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular General Motors tensioner. This O.E. Exact* part for the aftermarket meets all original equipment form, fit, and function specifications. * (O.E. Exact - Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design) . Caution: Many aftermarket parts suppliers have removed the internal damping component in their designs. This may cause system noise and vibration. A lift devise is molded into the arm of this tensioner to assist in belt removal and installation. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked Made in Canada. Product Features: Manufactured by the original equipment part supplier to insure proper form, fit, and performance. Internal round spring technology to provide constant belt tension and alignment throughout its service life. Installation instructions included. Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance Professional Mechanics will change this tensioner in approx. 20 minutes. Due to the fact that belts and tensioners have similar Original Equipment design life targets, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore doing both together will extend accessory drive life and lower overall labor versus performing these services separately. Most Belt Components products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > belts hoses & pulleys > belts > serpentine | Brand: Litens | Merchant: Advance Auto Parts

Barnett Performance Products Stock Replacement Clutch Kit

Barnett Performance Products Stock Replacement Clutch Kit

$126.99
View Product


Includes 8 friction plates Offers excellent energy absorption for smooth clutch action The positive, non-slip action also tolerates extreme heat Replaces OEMs 37910-90 and 37911-90
Category: automotive > motorcycle & powersports > parts > engine | Brand: Barnett | Merchant: J&P Cycles

Barnett Performance Products Kevlar Stock Replacement Clutch Kit

Barnett Performance Products Kevlar Stock Replacement Clutch Kit

$106.99
View Product


Kit consists of 7 friction plates and was designed as a stock replacement clutch set Compatible with either Barnett or stock original equipment steel drive plates Replaces OEM 36788-84
Category: automotive > motorcycle & powersports > parts > engine | Brand: Barnett | Merchant: J&P Cycles

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999131A

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999131A

$71.99
View Product


Litens was the Original Equipment (O.E.) supplier of this G.M. tensioner and offers this O.E. Exact* part for the aftermarket. This O.E. Exact* part for the aftermarket meets all original equipment form, fit, and function specifications. * (O.E. Exact - Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design) . This tensioner design with a molded locator pin to insure proper installation. Designed specifically for supercharged vehicle applications. 2nd tensioner along with 999130A Product Features: Designed & engineered by the original equipment part supplier to insure proper form, fit, and performance. Internal round spring technology to provide constant belt tension and alignment throughout its service life. Installation instructions included. Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability Professional Mechanics will change this tensioner in approx. 20 minutes. Due to the fact that belts and tensioners have similar Original Equipment design life targets, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore doing both together will extend accessory drive life and lower overall labor versus performing these services separately. Most Belt Components products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > belts hoses & pulleys > belts > serpentine | Brand: Litens | Merchant: Advance Auto Parts

Barnett Performance Products Replacement Clutch Kit

Barnett Performance Products Replacement Clutch Kit

$150.99
View Product


Barnett Performance Products's replacement clutch plate kits for Primo-Rivera clutches include their ""RQ"" friction plates and tempered steel drive plates RQ friction material provides a smoother, more positive engagement tempered steel drive plates are quality checked for flatness to ensure optimum performance Includes 7 friction and 8 steel plates
Category: automotive > replacement parts > transmission & drive train > clutches & parts > complete clutch sets | Brand: Barnett | Merchant: J&P Cycles

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999071A

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999071A

$60.99
View Product


This Litens hydraulic actuator is manufactured by the Original Equipment (O.E.) supplier of this popular BMW tensioner component. This O.E. Exact* part for the aftermarket meets all original equipment form, fit, and function specifications. * (O.E. Exact - Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design) . Note: Both the original part removed and this replacement hydraulic actuator are made in Germany. Caution: A low quality hydraulic actuator may leak causing damage to the belt drive system. For best results always use an OE quality actuator. Product Features: Manufactured by the original equipment part supplier to insure proper form, fit, and performance. Hydraulic tensioning technology Installation instructions included. No Tensioner or pulley Included Professional Mechanics will change this tensioner in approx. 20 minutes to 1 hour. Due to the fact that belts and tensioners have similar Original Equipment design life targets, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore doing both together will extend accessory drive life and lower overall labor versus performing these services separately. Most Belt Components products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > belts hoses & pulleys > belts > serpentine | Brand: Litens | Merchant: Advance Auto Parts

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999348A

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999348A

$53.99
View Product


This Litens belt tensioner is manufactured by the original equipment tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer's logo or part number applied to the part) . As with the original equipment part, this replacement tensioner is manufactured in Germany for Volkswagen. The tensioner maintains the O.E. round spring technology as well as the internal damping design specified for this application. This tensioner comes equipped with a lift feature for ease of belt removal as well as a new mounting bolt for precise installation. Product Features: Manufactured by the original equipment part supplier to insure proper form, fit, and performance. Internal round spring technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance. Installation instructions included. Heavy Duty Polymer Pulley Professional Mechanics will change this tensioner in 1 hour. Due to the fact that belts and tensioners have similar Original Equipment design life targets, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore doing both together will extend accessory drive life and lower overall labor versus performing these services separately. Most Belt Components products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > belts hoses & pulleys > belts > serpentine | Brand: Litens | Merchant: Advance Auto Parts

LUK Automotive Systems Original Equipment Quality Replacement Clutch Kit - 07-114

LUK Automotive Systems Original Equipment Quality Replacement Clutch Kit - 07-114

$159.99
View Product


Original Equipment Quality Replacement Clutch Kit. Most Clutch Components products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > transmission & drive train > clutches & parts > complete clutch sets | Brand: LUK Automotive Systems | Merchant: Advance Auto Parts

First Equipment Quality Strut Mounting Kit - L3033420496FEQ

First Equipment Quality Strut Mounting Kit - L3033420496FEQ

$41.19
View Product


First Equipment Quality (FEQ) provides high quality under car products, specifically for rubber and metal items, as well as front wheel drive axles. With global manufacturing facilities being ISO 9001, ISO TS/16949 and ISO 14001 Certified, the processes and quality are maintained to the highest standards providing superior products. Most Shock Absorber Mounts products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > shocks struts & suspension > mounting kits | Brand: First Equipment Quality | Merchant: Advance Auto Parts

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999224A

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999224A

$88.99
View Product


Litens is proud to offer this Honda/Acura tensioner produced by the Original Equipment (O.E.) supplier in Japan. This O.E. Exact* part for the aftermarket, meets all original equipment form, fit, and function specifications. * (O.E. Exact - Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design) . This tensioner design includes a heavy-duty steel pulley, round spring tensioning technology, and a close-tolerance mounting base. This drive is sensitive to belt mis-alignment and caution should be taken when choosing a replacement tensioner. Product Features: Manufactured by Bando - one of the world's largest original equipment tensioner suppliers to insure proper form, fit, and performance. Internal round spring technology to provide constant belt tension and alignment throughout its service life. Installation instructions included. Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance Professional Mechanics will change this tensioner in under 20 minutes. Due to the fact that belts and tensioners have similar Original Equipment design life targets, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore doing both together will extend accessory drive life and lower overall labor versus performing these services separately. Most Belt Components products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > belts hoses & pulleys > belts > serpentine | Brand: Litens | Merchant: Advance Auto Parts

Litens Automatic Serpentine Belt Tensioner - Original Equipment Quality - 999787A

Litens Automatic Serpentine Belt Tensioner - Original Equipment Quality - 999787A

$45.99
View Product


Litens was the Original Equipment (O.E.) supplier of this tensioner and offers this O.E. Exact part for the aftermarket. This popular tensioner, designed for Nissan and Suzuki 1.8L and 2.0L vehicles, looks, fits, and performs like the original part being replaced. Unlike many Non-O.E. aftermarket tensioners, the Litens part maintains the internal damping feature for optimal performance and life. O.E. Exact - Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design. Note - The heavy duty polymer pulley is attached to the tensioner with an integrated bolt/washer, has a molded locator pins for accurate installation, and the tensioner arm maintains the O.E. lift feature for easy belt removal, and installation. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring. Product Features: Manufactured by the original equipment part supplier to insure proper form, fit, and performance. Internal round spring technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance. Installation instructions included. Durable Polymer Pulley for long service life and performance. Professional Mechanics will change this tensioner in approx. 30 minutes Due to the fact that belts and tensioners have similar Original Equipment design life targets, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore doing both together will extend accessory drive life and lower overall labor versus performing these services separately. Most Belt Components products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > belts hoses & pulleys > belts > serpentine | Brand: Litens | Merchant: Advance Auto Parts

LUK Automotive Systems Original Equipment Quality Replacement Clutch Kit - 05-065

LUK Automotive Systems Original Equipment Quality Replacement Clutch Kit - 05-065

$139.99
View Product


Original Equipment Quality Replacement Clutch Kit. Most Clutch Components products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > transmission & drive train > clutches & parts > complete clutch sets | Brand: LUK Automotive Systems | Merchant: Advance Auto Parts

Barnett Performance Products Replacement Clutch Kit for Rivera Primo Pro Clutch

Barnett Performance Products Replacement Clutch Kit for Rivera Primo Pro Clutch

$175.99
View Product


Barnett Performance Products's replacement clutch plate kits for Primo-Rivera clutches include their ""RQ"" friction plates and tempered steel drive plates RQ friction material provides a smoother, more positive engagement tempered steel drive plates are quality checked for flatness to ensure optimum performance Includes 8 friction and 9 steel plates
Category: automotive > replacement parts > transmission & drive train > clutches & parts > complete clutch sets | Brand: Barnett | Merchant: J&P Cycles

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 910015A

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 910015A

$122.99
View Product


This Heavy Duty Truck & Bus tensioner is designed and engineered by Litens - the worlds largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer's logo or part number applied to the part) . This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a lift-lug feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Specifically designed for a wide variety of trucks and buses with a Detroit Diesel or Cummins engine. Product Features: Designed & engineered by the world's largest Original Equipment supplier of accessory drive tensioners and pulleys. Internal round spring technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance. Installation instructions included. Heavy Duty Electro-deposited coated (e-coat) Steel Pulley for superior corrosion resistance. Professional Mechanics will change this tensioner in approx. 1/2 hour Due to the fact that belts and tensioners have similar Original Equipment design life targets, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore doing both together will extend accessory drive life and lower overall labor versus performing these services separately. Most Belt Components products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > belts hoses & pulleys > belts > serpentine | Brand: Litens | Merchant: Advance Auto Parts

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999816A

Litens Automatic Serpentine Belt Tensioner -Original Equipment Quality - 999816A

$53.99
View Product


Litens was the Original Equipment (O.E.) supplier of this part and offers this O.E. Exact*part for the aftermarket. This popular tensioner, designed for Jeep Wrangler 3.8L vehicles, looks, fits, and performs like the original part being replaced. Unlike many Non-O.E. aftermarket tensioners, the Litens part maintains the internal damping feature for optimal performance and life. O.E. Exact - Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design. Note - The heavy duty polymer pulley is attached to the tensioner with an integrated bolt/washer, has two molded locator pins for accurate installation, and the tensioner arm maintains the O.E. lift feature for easy belt removal, and installation. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring. Common O.E. reference number 53032860A Product Features: Manufactured by the original equipment part supplier to insure proper form, fit, and performance. Internal round spring technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance. Installation instructions included. Durable Polymer Pulleys for long service life and performance. Professional Mechanics will change this tensioner in approx. 30 minutes Due to the fact that belts and tensioners have similar Original Equipment design life targets, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore doing both together will extend accessory drive life and lower overall labor versus performing these services separately. Most Belt Components products are available for in-store pickup from Advance Auto Parts.
Category: automotive > replacement parts > belts hoses & pulleys > belts > serpentine | Brand: Litens | Merchant: Advance Auto Parts