Cell Buckle Universal Electronic Device, Cell Phone and MP3 Player Mount

Cell Buckle Universal Electronic Device, Cell Phone and MP3 Player Mount
$19.99

Shop Now

Cell Buckle Universal Electronic Device, Cell Phone and MP3 Player Mount
Securely attach your device to your handle bars in a matter of seconds A durable locking slider moves up and down to adjust to the size of a mobile phone, GPS, iPod, MP3 player or other handheld device Adjustable slider fits devices up to 2.9"" wide and 0.8"" thick Kit comes with two mounts, one that fits 7/8"" to 1"" diameter tubing and the other that fits 1-1/4"" to 1-1/2"" diameter tubing such as handle bars, highway bars, and other tubing Simplistic and well thought out design allows you to use this mount in every aspect of your daily routine Use it in the shop, in your car or boat, at the gym, around the house, at the beach, or wherever your next adventure takes you Invented by a biker and backed by a manufacture's life-time warranty
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts Brand: Cell Buckle
J&P Cycles
$19.99
Shop Now


Similar Products:

UNIVERSAL UNV08116 Phone Stand, Black,10-1/2in. Dx5-1/4in. H G1888139

UNIVERSAL UNV08116 Phone Stand, Black,10-1/2in. Dx5-1/4in. H G1888139

$19.68
View Product


Phone Stand, Plastic, Black, Length 10-1/2 In, Width 12-1/4 In, Height 5-1/4 In, Depth 10-1/2 In. FeaturesColor: BlackDepth: 10-1/2"Height: 5-1/4"Item: Phone StandLength: 10-1/2"Material: PlasticWidth: 12-1/4
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Universal | Merchant: Walmart US

RAM Mounts Universal Finger Grip Cell Phone Holder (Color: Black)

RAM Mounts Universal Finger Grip Cell Phone Holder (Color: Black)

$21.99
View Product


RAM Mounts Universal Finger Grip Smartphone Cradle The RAM-HOL-UN4 Universal Finger Grip Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with 3 sets of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. The spine plate contains the universal AMPs and 1.5 x 2 hole patterns. Compatible with any of the available RAM Mounts Cradle Adapters. This mount is designed to hold the following devices: Cell Phones (check measurements below for dimensions) 2-Way Radios GPS Devices Works with OtterBox (Defender, Commuter, Impact) Cases, Phones with Bumper, Twisted Metal Case and More Perfect rugged solution for the Blackberry, HTC Evo, Droid X, iPhone, and More Height Dimensions: Minimum with Top and Bottom Plates: 5.25 Maximum with Top and Bottom Plates: 6.0 Top and bottom plates can be removed for larger devices Spine Plate Dimensions: 3 Width x 3 Height Using Short Arm Side Clamps: Maximum Depth: 0.75 Minimum Width: 1.25 Maximum Width: 3.0 Using Medium Arm Side Clamps: Maximum Depth: 1.25 Minimum Width: 1.5 Maximum Width: 3.5 Using Long Arm Side Clamps: Maximum Depth: 1.6 Minimum Width: 2.25 Maximum Width: 3.5 Material: High Strength Composite Note: This RAM Mount Holder does not include the Diamond Base and Ball required to attach to the Holder and RAM mounting system.
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: RAM Mounts | Merchant: Cycle Gear

Universal Inkjet Premium Compatible Chip for Samsung CLP-350

Universal Inkjet Premium Compatible Chip for Samsung CLP-350

$2.67
View Product


Universal Inkjet Premium Compatible Chip for Samsung CLP-350:Compatible with multiple systemsMeets or exceeds OEM standardsEasy to use
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Universal Inkjet | Merchant: Walmart US

RAM Mounts Universal X-Grip Cell Phone Cradle With Fork Stem Mount

RAM Mounts Universal X-Grip Cell Phone Cradle With Fork Stem Mount

$44.98
View Product


Consists of a fork stem base; short double socket arm and universal X-Grip cradle. The included X-Grip cradle has a four leg design with great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip cradle expands and contracts; allowing for a perfect custom fit of your cell phone.The X-Grip includes a device tether recommended for outdoor applicatioins. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Made from powder coated marine grade aluminum; marine grade stainless steel components and high strength composite Cradle dimensions: Minimum Width = 1 7/8'' (Minimum Height = 4 1/4'') Maximum Width = 3 1/4'' (Minimum Height = 2 1/4'') Depth 7/8'' 1'' Rubber ball ''B'' size Compatible Devices: Apple iPhone 6; Apple iPhone 5s; Apple iPhone 5c; Apple iPhone 5; Apple iPhone 4S; Apple iPhone 4; Apple iPod touch (All Models) ; Apple iPod (G1-G5) Weight 0.6 lbs. Black
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: RAM Mounts | Merchant: Chaparral Motorsports

RAM Mounts Universal Finger Grip Cradle

RAM Mounts Universal Finger Grip Cradle

$21.99
View Product


The RAM-HOL-UN4U (Universal Finger Grip Cradle) is designed to hold a large variety of cell phones and electronic devices. The holder comes with (three sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. The perfect solution that is the best phone mount, car mount, motorcycle mount and can be used with several other phone accessories including Samsung accessories and LG accessories.The spine plate contains the universal AMPs and 1.5"" x 2"" hole patterns.Included is a set of two nuts and bolts to connect the holder to any RAM components or mounts that contain the universal AMPs hole pattern.Compatible devices: Most cell phone and two-way radios.Note: Cradle ONLY, mount sold separately.Detailed Specifications:Height dimensions:Minimum with Top and Bottom Plates: 5.25"".Maximum with Top and Bottom Plates: 6.0"".Note: The top and bottom plates can be removed for larger devices.Spine Plate dimensions: 2.5"" width x 5"" height.Using Short Arm Side Clamps:Maximum depth: 0.75"".Minimum width: 1.25"".Maximum width: 3.0"".Using Medium Arm Side Clamps:Maximum depth: 1.25"".Minimum width: 1.5"".Maximum width: 3.5"".Using Long Arm Side Clamps:Maximum depth: 1.6"".Minimum width: 2.25"".Maximum width: 3.5"".Material: High strength composite.Weight: 0.45 pounds.
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Ram Mounts | Merchant: MotoSport

Air Vent Car Mount Magnetic Universal Car Mount Holder

Air Vent Car Mount Magnetic Universal Car Mount Holder

$3.99
View Product


Vent Car Mount, Air Vent Magnetic Universal Car Mount Holder (Black) for iPhone 6S/6, Galaxy S6/S6 Edge, LG G4, Apple iPhone 5S 5C 5 4S, Samsung Galaxy S5 S4, Nexus 5X, HTC M9 Compatible with most devices Compact and economical design Simple, effortless installation Mounts to any vehicle's air vent and promotes optimal/full view of your device Sturdy, cradle-less and attractive device holding system The Vent Car Mount is a sturdy, cradle-less, attractive device holding system focused on simplicity. Simply place the included slim, plate inside the case of your device and attach the tiny, magnetic clip to your car's air vent. The strong-powered magnet will ensure that your device is secure, while the cradle-less feature enables you to completely view your device without any distracting arms and holders. -Designed with Drivers in Mind Compatible with : Most devices and some popular compatible models are
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles | Brand: Universal | Merchant: Wirelessoemshop

Universal Inkjet Premium Compatible Chip for Samsung CLP-415/CLX-4195

Universal Inkjet Premium Compatible Chip for Samsung CLP-415/CLX-4195

$12.72
View Product


Universal Inkjet Premium Compatible Chip for Samsung CLP-415/CLX-4195:Compatible with multiple systemsMeets or exceeds OEM standardsEasy to use
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Universal Inkjet | Merchant: Walmart US

Ram Mount Tough-Claw Mount with Universal X-Grip Phone Cradle

Ram Mount Tough-Claw Mount with Universal X-Grip Phone Cradle

$45.99
View Product


Consists of the small Tough-Claw base and universal X-Grip cradle The X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your smart-phone behind foam pads and plastic arms The X-Grip cradle expands and contracts for perfect fit of most smart phones This mount rotates 360 degrees and tilts for optimal viewing The X-Grip includes a device tether for added security in rough conditions Tough-Claw clamps to 7/8"" up to 1-1/2"" handlebars Tough-Claw only 753-334 Individual X-Grip phone cradles 753-333 or 503-122 Teathers 832-377, 832-376
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Ram Mount | Merchant: J&P Cycles

Smart Wrist Watch Phone Mate Bluetooth U8 for Android devices

Smart Wrist Watch Phone Mate Bluetooth U8 for Android devices

$15.99
View Product


Smart Wrist Watch Phone Mate Bluetooth U8 For iPhone IOS Android, HTC, Samsung This is a new Bluetooth SmartWatch which is compatible with all Bluetooth V4.0 or above enabled smartphones. With Android devices it allows you to do everything that the watch offers including making phone calls, receiving text messages, social media updates, receiving e-mail, address book, listen to music, pedometer, sleep monitor, barometer simply by syncing with their smartphone apps and much more! It does work with all iPhone models However not all the features will work with iphone but you can still use it for making phone calls, use the address book, listen to music, pedometer, sleep monitor, barometer and more. Features:1. Operate your phone's main functions on your wrist2. Good texture, simple and generous appearance3. Support English and Chinese4. Synchronize the telephone book o
Category: electronics > cell phones & accessories > cell phones > unlocked cell phones | Brand: Universal | Merchant: Wirelessoemshop

RAM Mounts RAM-HOL-UN7BU RAM Universal X-Grip Cell/iPhone Holder with 1 Ball

RAM Mounts RAM-HOL-UN7BU RAM Universal X-Grip Cell/iPhone Holder with 1 Ball

$19.91
View Product


Sometimes its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape you've found it.
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: RAM Mounts | Merchant: MacMall UPC: 0793442932298

Universal Inkjet Premium Compatible Chip for Samsung MLT-D203E

Universal Inkjet Premium Compatible Chip for Samsung MLT-D203E

$23.14
View Product


Universal Inkjet Premium Compatible Chip for Samsung MLT-D203E: Compatible with multiple systemsMeets or exceeds OEM standardsEasy to use
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Universal Inkjet | Merchant: Walmart US

Universal Inkjet Premium Compatible Chip for Samsung CLP-770

Universal Inkjet Premium Compatible Chip for Samsung CLP-770

$8.17
View Product


Universal Inkjet Premium Compatible Chip for Samsung CLP-770:Compatible with multiple systemsMeets or exceeds OEM standardsEasy to use
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Universal Inkjet | Merchant: Walmart US

RAM Mounts Universal X-Grip Cell Phone Cradle With Master Cylinder Mount

RAM Mounts Universal X-Grip Cell Phone Cradle With Master Cylinder Mount

$56.99
View Product


Consists of a hardware for mounting to both brake/clutch reservoirs and rails that are 1/2'' to 1 1/4'' in diameter; double socket arm and universal X-Grip cell phone cradle. Designed into the mount is a 1'' diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob; allows you to move the X-Grip mount to your optimum viewing position. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip cradle expands and contracts; allowing for a perfect custom fit of your cell phone. The X-Grip includes a device tether recommended for outdoor applicatioins. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Made from powder coated marine grade aluminum; marine grade stainless steel components and high strength composite Cradle Dimensions Minimum Width = 1 7/8'' (Minimum Height = 4 1/4'') Maximum Width = 3 1/4'' (Minimum Height = 2 1/4'') Depth 7/8'' Rustproof High strength composite and stainless steel construction Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Includes Tether for open cockpit and extreme environments 1'' Rubber Ball ''B'' Size Weight 1.1 lbs. Lifetime manufacturer's warranty Made in the USA Black Note: To see if this product will mount to your motorcycle; check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94'' and a maximum of 1.58''. RAM highly recommends usin
Category: automotive > replacement parts > engines & engine parts > engine parts > engine mounts | Brand: RAM Mounts | Merchant: Chaparral Motorsports

7.0W Phablet GSM Unlocked Smartphone With Pro Up To 10.2 Universal Tablet Sleeve

7.0W Phablet GSM Unlocked Smartphone With Pro Up To 10.2 Universal Tablet Sleeve

$84.88
View Product


Sky Devices SKY 7.0W 7.0W Phablet GSM Unlocked Smartphone With Pro Up To 10.2 Universal Tablet Sleeve
Category: electronics > cell phones & accessories > unlocked cell phones | Brand: Sky Devices | Merchant: BrandsMart USA

Ram Mounts Ram Universal Finger Grip Holder

Ram Mounts Ram Universal Finger Grip Holder

$48.47
View Product


The Ram Universal Finger Grip Holder is constructed of high strength plastic. It is designed to hold a large amount of cell phones and electronic devices. The holder has four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. Finger Grip Holder Mount is constructed of powder coated marine grade aluminum. 1 rubber ball. Included in this package is hardware for tubing that is 0.50 to 1.25 in diameter and double socket arm.
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Ram Mounts | Merchant: Rocky Mountain ATV

RAM Mounts Stem Mount Finger Grip Cell Phone Kit (Color: Black)

RAM Mounts Stem Mount Finger Grip Cell Phone Kit (Color: Black)

$58.49
View Product


RAM Mounts Stem Mount Finger Grip Cellphone Kit The RAM-B-176-UN4 consists of a double socket arm, hardware for mounting to your motorcycle stem, and finger grip cell phone holder. Designed into the mount is a 1 diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm this with a twist of the arm knob, allows you can move the mount to your optimum viewing position. The included finger grip cradle is designed to hold a large amount of cell phones and electronic devices. The holder comes with 3 sets of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. This mount is designed to hold the following devices: Cell Phones (check measurements below for dimensions) 2-Way Radios GPS Devices Height Dimensions: Minimum with Top and Bottom Plates: 5.25 Maximum with Top and Bottom Plates: 6.0 Top and bottom plates can be removed for larger devices Spine Plate Dimensions: 2.5W x 5.0H Socket Arm: 3 Long Using Short Arm Side Clamps: Maximum Depth: 0.75 Minimum Width: 1.25 Maximum Width: 3.0 Using Medium Arm Side Clamps: Maximum Depth: 1.25 Minimum Width: 1.5 Maximum Width: 3.5 Using Long Arm Side Clamps: Maximum Depth: 1.6 Minimum Width: 2.25 Maximum Width: 3.5 The fork stem mount is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or 0.5 1.10 at the following intervals: Metric Standard 12mm 0.5 14mm 0.55 16mm 0.63 18mm 0.71 20mm 0.79 28mm 1.10 Material: Powder Coated Marine Grade Aluminum Ball Size: 1 Rubber Ball B Size
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: RAM Mounts | Merchant: Cycle Gear

RAM Mounts Universal X-Grip Large Cell Phone Cradle

RAM Mounts Universal X-Grip Large Cell Phone Cradle

$27.99
View Product


Four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Made from high strength composite and stainless steel Rustproof Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Includes Tether for open cockpit and extreme environments Cradle Dimensions Minimum Width = 1 3/4'' (Minimum Height = 5 1/2'') Maximum Width = 4 1/2'' (Minimum Height = 3 1/4'') Depth 7/8'' 1'' Rubber ball ''B'' size Lifetime manufacturer's warranty Weight 0.25 lbs. Made in the USA
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: RAM Mounts | Merchant: Chaparral Motorsports

Universal Inkjet Premium Compatible Chip for Samsung CLP-310/CLP-315

Universal Inkjet Premium Compatible Chip for Samsung CLP-310/CLP-315

$5.00
View Product


Universal Inkjet Premium Compatible Chip for Samsung CLP-310/CLP-315:Compatible with multiple systemsMeets or exceeds OEM standardsEasy to use
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Universal Inkjet | Merchant: Walmart US

RAM Mounts Universal Spring Loaded Cell Phone Holder

RAM Mounts Universal Spring Loaded Cell Phone Holder

$14.99
View Product


RAM stands for Round-A-Mount and was introduced in 1995. Far and away the most innovative product line of its kind, RAM continues to evolve into one of the most sought after accessories for electronics. RAM products have quickly become an essential mounting component for a wide variety of applications including rugged vehicle, industrial, military and defense, material handling as well as any application requiring a robust mounting solution.Features:Material: High-strength composite.Note: RAM cradles do not include the Diamond Base and Ball or Diamond Composite Base and Ball, either required to attach to the cradle and RAM mounting system (sold separately) .This cradle is designed to hold the following devices:Apple iPhone 3G, iPhone 3G S and iPhone 4.Blackberry Bold and Storm 2.HTC Droid Incredible, Evo 4G and G2.Motorola Droid Pro, Droid 2 and Droid X.Nokia N8, N900 and X6.Samsung Galaxy S and Wave.Windows Phone 7.iPhones and cell phones with skins, sleeves, bumpers and cases.Cradle clamping dimensions:Height range: 4.75"" - 6.25"".Width range: 2.25"" - 3.25"".
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Ram Mounts | Merchant: MotoSport

RAM Mounts X-Grip Cell Phone Cradle Replacement Post Caps

RAM Mounts X-Grip Cell Phone Cradle Replacement Post Caps

$4.99
View Product


Made from rubber Accessory for all RAM X-Grip cradles and mounts Lifetime manufacturer's warranty Weight 0.05 lbs Made in the USA Black
Category: electronics > cell phones & accessories > accessories > chargers > cell phone docks | Brand: RAM Mounts | Merchant: Chaparral Motorsports

RAM Mounts Universal Cell Phone Holder with Suction Mount 2016

RAM Mounts Universal Cell Phone Holder with Suction Mount 2016

$47.99
View Product


The RAM Universal Cell Phone Holder with Suction Mount is the perfect complement to the modern sleek interior of today's vehicles. The X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip holder expands and contracts, allowing for a perfect custom fit of your cell phone. The mount consists of a 3.25 in twist lock suction cup base and a double socket system. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1 in diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm to allow for almost infinite adjustment and perfect viewing angles. Spring loaded X-Grip offers a perfect custom fit of your cell phone, Four leg design grips without obscuring screen, Suction cup will grip glass and non-porous plastic surfaces, Ball and socket allows almost infinite adjustment to get the perfect viewing angle, Accommodates 1 in rubber ball, Model Year: 2016, Product ID: 430135, Model Number: RAP-B-166-UN7, GTIN: 0793442934001
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Ram Mounts | Merchant: SummitOnline.com

Universal Inkjet Premium Compatible Chip for Samsung CLP-500/CLP-550

Universal Inkjet Premium Compatible Chip for Samsung CLP-500/CLP-550

$4.61
View Product


Universal Inkjet Premium Compatible Chip for Samsung CLP-500/CLP-550:Compatible with multiple systemsMeets or exceeds OEM standardsEasy to use
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Universal Inkjet | Merchant: Walmart US

Universal Inkjet Premium Compatible Chip for Samsung CLP-510

Universal Inkjet Premium Compatible Chip for Samsung CLP-510

$2.68
View Product


Universal Inkjet Premium Compatible Chip for Samsung CLP-510:Compatible with multiple systemsMeets or exceeds OEM standardsEasy to use
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Universal Inkjet | Merchant: Walmart US

RAM Mounts Universal X-Grip Large Cell Phone Cradle With Handlebar Mount

RAM Mounts Universal X-Grip Large Cell Phone Cradle With Handlebar Mount

$78.99
View Product


Consists of the Tough-Claw rail clamp base; LONG length double socket arm and universal spring loaded X-Grip cradle for 5'' large phones and phablets. The spring loaded X-Grip cradle expands and contracts; allowing for a perfect custom fit of your 5'' phone or phablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw rail clamp base is the perfect mounting base for quick and easy toolless installation and removal on round; square; odd shaped rails and bars. The Tough-Claw can be clamped on rails from 5/8'' - 1 1/2'' outer diameter. Perfectly suited for mounting on the yoke of an aircraft; handlebars and seat posts of bicycles; kayak rails; roll bars and much more; the RAM Tough-Claw will soon become another essential RAM component in your collection of mounting options. The X-Grip includes a device tether recommended for outdoor applicatioins. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Made from powder coated marine grade aluminum; marine grade stainless steel Components and high strength composite Clamping Range (Rail/Tube Surfaces) : 5/8'' to 1 1/2'' Clamping Range (Flat Surfaces) : 0'' to 1.14'' X-Grip Cradle Dimensions Minimum Width: 1 3/4'' (Minimum Heigh: 5 1/2'') Maximum Width: 4 1/2'' (Minimum Height: 3 1/4'') Depth: 7/8'' 1'' Rubber ball ''B'' size Rustproof Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Includes Tether for open cockpit and extreme environments Lifetime manufacturer's warranty Weight 1 lbs. Made in the USA
Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: RAM Mounts | Merchant: Chaparral Motorsports